5 metreye varan dijital baskı çözümlerimiz sayesinde Trutex dijital baskı kumaşları eşliğindeki Ledu lightboxlarla fark edilin!

Ledu bünyesinde satışını yapmakta olduğumuz Trutex markamızla kaliteli ve sektörün tüm ihtiyaçlarına yanıt verebilen dijital baskı kumaşları tedarik etmekteyiz.
Trutex dijital baskı kumaşları geniş ürün yelpazesiyle tekstil baskı kumaşları alanında dünya devleriyle çalışmaktadır. Geniş ürün yelpazesinde uv, latex, solvent, dye-sub ve paper transfer tekniklerine uygun dijital tekstil baskı kumaşları yer almaktadır. Ledu tarafından tedarik edilen dijital baskı kumaşları, istenilen ölçülerde özel olarak kesilerek satışı yapılmaktadır. Kendi reklam ürün gruplarında da Trutex dijital baskı kumaşlarını kullanan firmamız, doğru kumaş, doğru baskı ve doğru led aydınlatmalarıyla dijital tekstil reklam baskısı ve led aydınlatmalarının kalitesini ortaya koymaktadır. Tekstil transfer baskısı ve direkt dijital tekstil baskılarına uygun Trutex baskı kumaşları, Avrupa standartlarında yanmaz ve kırışmaz teknik baskı kumaşlarıdır.
Teknik baskı kumaşlarının kullanım alanları arasında yeralan tabela reklam görselleri farklı amaçlar doğrultusunda çeşitli kumaşlara basılabilmektedir. Su geçirmez özelliğiyle şişme kumaşlara (balon, havuz) basılabildiği gibi çadır, tente gibi ihtiyaçlar için branda gibi kumaşlarada dijital baskı yapılabilmektedir. İç mekanlarda kullanılmak üzere imalatı yapılan canvas tablo üreticilerinin kullandığı canvas baskı kumaşı gibi birçok teknik baskı kumaşı Trutex ürün yelpazemizde mevcuttur.
Dijital baskı tekniklerinin gelişimiyle birlikte tekstil baskı kumaşlarının kalitesi de, görselin kalitesi açısından büyük önem taşımaktadır. Ledu olarak reklam sektörüne yönelik çalışmalarımız arasında dijital tekstil baskı yer almaktadır. Yüksek teknoloji ürünü direkt kumaşa baskı yapan dijital baskı makineleriyle seri dijital tekstil baskısı yapmaktayız. Ledu olarak bünyemizde bulunan, en son teknoloji olan profesyonel baskı makineleriyle, dijital tekstil baskı işleriniz hızlı ve profesyonel olarak yapılmaktadır.
COMPOSITION | 100% Polyester |
WEIGHT | 190 gr/m² (± 5%) |
WIDTH | 160 – 260 – 320 cm |
WHITENESS | >100 |
TYPE | UV / Latex / ECO Solvent / Sublimation Transfer |
FLAME RETARDANCY | DIN 4102 B1 / NFPA 701 / BS 5867 Part 2 Type B |
APPLICATIONS | Lightbox, Display Frame Systems, Pop-up Display Systems, Blow-ups |




*Uv-inks could cause curling and test prints for suitability must always be carried out before actual printing job
**Latex Ink backlight results are limited
The information is based on the evaluation of carefully performed tests and practical experience.Due to the different conditions occurring during printing, test prints should be made.A binding assurance of the properties can not to be given for the reasons mentioned above.
COMPOSITION | 100% Polyester |
WEIGHT | 190 gr/m² (± 5%) |
WIDTH | 160-260-320 cm |
|
>100 |
|
UV / Latex / ECO Solvent / Sublimation Transfer |
|
Lightbox, Display Frame Systems, Outdoor, Blow-ups |



*Uv-inks could cause curling and test prints for suitability must always be carried out before actual printing job
The information is based on the evaluation of carefully performed tests and practical experience.
Due to the different conditions occurring during printing, test prints should be made.
A binding assurance of the properties can not to be given for the reasons mentioned above.
COMPOSITION | 100% Polyester |
WEIGHT | 130 gr/m² (± 5%) |
WIDTH | 320 cm |
|
>100 |
|
UV / Latex / Solvent |
|
M1 / B1 / CA 1237 Sm / NFPA 701 |
|
Lightbox, Display Frame Systems |




*Uv-inks could cause curling and test prints for suitability must always be carried out before actual printing job
**Latex Ink backlight results are limited
The information is based on the evaluation of carefully performed tests and practical experience.
Due to the different conditions occurring during printing, test prints should be made.
A binding assurance of the properties can not to be given for the reasons mentioned above.
COMPOSITION | 100% Polyester |
WEIGHT | 120 gr/m² (± 5%) |
WIDTH | 320 cm |
|
>100 |
|
UV / Latex |
|
DIN 4102 B1 / NFPA 701 Test 1 |
|
Lightbox, Display Frame Systems |




*Uv-inks could cause curling and test prints for suitability must always be carried out before actual printing job
**Latex Ink backlight results are limited
The information is based on the evaluation of carefully performed tests and practical experience.
Due to the different conditions occurring during printing, test prints should be made.
A binding assurance of the properties can not to be given for the reasons mentioned above.
COMPOSITION | 100% Polyester |
WEIGHT | 120 gr/m² (± 5%) |
WIDTH | 320 cm |
|
>100 |
|
UV / Latex |
|
Lightbox, Display Frame Systems |



*Uv-inks could cause curling and test prints for suitability must always be carried out before actual printing job
The information is based on the evaluation of carefully performed tests and practical experience.
Due to the different conditions occurring during printing, test prints should be made.
A binding assurance of the properties can not to be given for the reasons mentioned above.
COMPOSITION | 100% Polyester |
WEIGHT | 185 gr/m² (±5%) |
WIDTH | 310 – 505 cm |
|
>100 |
|
UV / Latex / Solvent |
|
DIN EN 13501-1 / B-s1, d0 |
|
Lightbox, Display Frame Systems |




*Uv-inks could cause curling and test prints for suitability must always be carried out before actual printing job
**Latex Ink backlight results are limited
The information is based on the evaluation of carefully performed tests and practical experience.Due to the different conditions occurring during printing, test prints should be made.A binding assurance of the properties can not to be given for the reasons mentioned above.
COMPOSITION | 100% Polyester |
WEIGHT | 250 gr/m² (±5%) |
WIDTH | 310 cm |
|
>145 |
|
Sublimation Transfer / Sublimation Direct |
|
DIN 4102 B1 / NFPA 701 / BS 5867 Part 2 Type B |
|
Lightbox, Display Frame Systems, Projection Front |




The information is based on the evaluation of carefully performed tests and practical experience.
Due to the different conditions occurring during printing, test prints should be made.
A binding assurance of the properties can not to be given for the reasons mentioned above.
COMPOSITION | 100% Polyester |
WEIGHT | 155 gr/m² (±5%) |
WIDTH | 152-255-310 cm |
|
>130 |
|
Latex / Sublimation Transfer / Sublimation Direct |
|
DIN 4102 B1 / NFPA 701 / BS 5867 Part 2 Type B / M1* |
|
Lightbox, Display Frame Systems |




The information is based on the evaluation of carefully performed tests and practical experience.
Due to the different conditions occurring during printing, test prints should be made.
A binding assurance of the properties can not to be given for the reasons mentioned above.
COMPOSITION | 100% Polyester |
WEIGHT | 185 gr/m² (±5%) |
WIDTH | 315 cm |
|
>100 |
|
UV / Latex / Eco Solvent |
|
Display frame system, Advertising banner |



*Uv-inks could cause curling and test prints for suitability must always be carried out before actual printing job
The information is based on the evaluation of carefully performed tests and practical experience.Due to the different conditions occurring during printing, test prints should be made.A binding assurance of the properties can not to be given for the reasons mentioned above.
COMPOSITION | 100% Polyester |
WEIGHT | 210 gr/m² (±5%) |
WIDTH | 260-310-320 cm |
|
>130 |
|
UV / Latex / Sublimation Transfer / Sublimation Direct |
|
DIN 4102 B1 / NFPA 701 / BS 5867 Part 2 Type B |
|
Lightbox, Display Frame Systems |




*Uv-inks could cause curling and test prints for suitability must always be carried out before actual printing job
**Latex Ink backlight results are limited
The information is based on the evaluation of carefully performed tests and practical experience.Due to the different conditions occurring during printing, test prints should be made.A binding assurance of the properties can not to be given for the reasons mentioned above.
COMPOSITION | 100% Polyester |
WEIGHT | 185 gr/m² (±5%) |
WIDTH | 315 cm |
|
>130 |
|
Sublimation Direct / Sublimation Transfer / Latex |
|
DIN 4102 B1 / NFPA 701 / BS 5867 Part 2 Type B |
|
Display frame system, Advertising banner |




The information is based on the evaluation of carefully performed tests and practical experience.
Due to the different conditions occurring during printing, test prints should be made.
A binding assurance of the properties can not to be given for the reasons mentioned above.
COMPOSITION | 100% Polyester |
WEIGHT | 210 gr/m² (±5%) |
WIDTH | 315 cm |
|
>140 |
|
Sublimation Direct / Sublimation Transfer / Latex |
|
DIN 4102 B1 / NFPA 701 / BS 5867 Part 2 Type B |
|
Display frame system, Advertising banner |




The information is based on the evaluation of carefully performed tests and practical experience.
Due to the different conditions occurring during printing, test prints should be made.
A binding assurance of the properties can not to be given for the reasons mentioned above.
COMPOSITION | 100% Polyester |
WEIGHT | 245 gr/m² (±5%) |
WIDTH | 310 cm |
|
>130 |
|
Sublimation Direct / Sublimation Transfer / Latex |
|
DIN 4102 B1 / NFPA 701 / BS 5867 Part 2 Type B |
|
Elastic Decoration, Chair Covers, Covering curved frame |




The information is based on the evaluation of carefully performed tests and practical experience.
Due to the different conditions occurring during printing, test prints should be made.
A binding assurance of the properties can not to be given for the reasons mentioned above.
COMPOSITION | 100% Polyester |
WEIGHT | 115 gr/m² (±5%) |
WIDTH | 320 cm |
|
>150 |
|
Sublimation Direct / Sublimation Transfer |
|
DIN 4102 B1 / NFPA 701 / BS 5867 Part 2 Type B |
|
Flag |




The information is based on the evaluation of carefully performed tests and practical experience. Due to the different conditions occurring during printing, test prints should be made. A binding assurance of the properties can not to be given for the reasons mentioned above.
COMPOSITION | 100% Polyester |
WEIGHT | 240 gr/m² (±5%) |
WIDTH | 160-260-320 cm |
|
>90 |
|
UV / Latex / ECO Solvent |
|
DIN 4102 B1 / NFPA 701 / BS 5867 Part 2 Type B |
|
Frame systems with black backside |




*Uv-inks could cause curling and test prints for suitability must always be carried out before actual printing job
**Latex Ink backlight results are limited
The information is based on the evaluation of carefully performed tests and practical experience.Due to the different conditions occurring during printing, test prints should be made.A binding assurance of the properties can not to be given for the reasons mentioned above.
COMPOSITION | 100% Polyester |
WEIGHT | 260 gr/m² (±5%) |
WIDTH | 320 cm |
|
>90 |
|
UV / Sublimation Printing |
|
B1 |
|
Display Frame Systems, Roll Up |




*Uv-inks could cause curling and test prints for suitability must always be carried out before actual printing job
**Latex Ink backlight results are limited
The information is based on the evaluation of carefully performed tests and practical experience.Due to the different conditions occurring during printing, test prints should be made.A binding assurance of the properties can not to be given for the reasons mentioned above.
COMPOSITION | 55% Cotton, 45% Polyester |
WEIGHT | 310 gr/m² (±5%) |
WIDTH | 310 cm |
|
>85 |
|
UV / Latex |
|
Framed artwork, art reproduction |



*Uv-inks could cause curling and test prints for suitability must always be carried out before actual printing job
The information is based on the evaluation of carefully performed tests and practical experience.
Due to the different conditions occurring during printing, test prints should be made.
A binding assurance of the properties can not to be given for the reasons mentioned above.
COMPOSITION | 100% Polyester |
WEIGHT | 220 gr/m² (±5%) |
WIDTH | 155 - 310 cm |
|
>150 |
|
UV / Sublimation Transfer / Sublimation Direct / Latex |
|
DIN 4102-1 B1 |
|
Lightbox, Display Frame Systems |




*Uv-inks could cause curling and test prints for suitability must always be carried out before actual printing job
The information is based on the evaluation of carefully performed tests and practical experience.
Due to the different conditions occurring during printing, test prints should be made.
A binding assurance of the properties can not to be given for the reasons mentioned above.